CNC Turning for Aluminum 7075-T6
Turning 7075 aluminum requires slightly lower speeds than 6061 but still machines very well. The higher hardness actually helps chip formation and produces cleaner breaks.
推奨加工パラメータ
| パラメータ | 値 |
|---|---|
| 達成可能な公差 | ±0.02 mm (±0.0008") |
| 表面粗さ | Ra 0.2-0.8 μm |
| 切削速度 | 250-500 m/min |
| 送り速度 | 0.08-0.20 mm/rev |
| 工具推奨 | Carbide inserts with chip breaker geometry. PCD for mirror finish. TiAlN coated for extended life. |
専門家の加工ヒント
1
Use chip-breaking inserts for heavy roughing
2
Lower speeds than 6061 but still fast
3
Rigid setup important for long parts
4
Finishing passes at high speed for best Ra
一般的な製造部品
Aerospace shafts
High-strength fittings
Precision dowel pins
Threaded studs
Roller components
加工の課題
- Stress-induced warping on thin-wall parts
- Requires careful tool engagement to prevent chatter