CNC Turning for Aluminum 6061-T6
Aluminum 6061 is ideal for CNC turning, producing excellent chip formation and surface finish at high speeds. It is the most commonly turned aluminum alloy.
推奨加工パラメータ
| パラメータ | 値 |
|---|---|
| 達成可能な公差 | ±0.02 mm (±0.0008") |
| 表面粗さ | Ra 0.2-0.8 μm |
| 切削速度 | 300-600 m/min |
| 送り速度 | 0.08-0.25 mm/rev |
| 工具推奨 | Carbide inserts with sharp edge, positive rake. PCD for high-volume. Cermet for finishing. |
専門家の加工ヒント
1
Use sharp positive-rake inserts
2
High cutting speeds (300+ m/min) for best finish
3
Chip breakers may not be needed — chips break naturally
4
Light finishing passes for mirror finish
一般的な製造部品
Shafts and spindles
Bushings and spacers
Threaded fittings
Knobs and handles
Pneumatic cylinder bodies
加工の課題
- Built-up edge at low speeds
- Long chips at high depth of cut