CNC Turning for Alloy Steel 4140
4140 alloy steel turns predictably with good chip formation. In the annealed state, it is straightforward to machine. Pre-hardened material requires more attention to tooling and parameters.
推奨加工パラメータ
| パラメータ | 値 |
|---|---|
| 達成可能な公差 | ±0.02 mm (±0.0008") |
| 表面粗さ | Ra 0.4-1.6 μm |
| 切削速度 | 150-250 m/min (annealed) |
| 送り速度 | 0.10-0.30 mm/rev |
| 工具推奨 | Carbide inserts grade P20-P30 with TiCN or TiAlN coating. Use heavy-duty insert grades for pre-hardened. |
専門家の加工ヒント
1
Use inserts rated for interrupted cuts if pre-hardened
2
Flood coolant for heat dissipation
3
Chip-breaking inserts recommended
4
Reduce speed 30-40% for pre-hardened stock
一般的な製造部品
Shafts and axles
Coupling hubs
Sprocket hubs
Piston rods
Toolholder bodies
加工の課題
- Pre-hardened condition wears tools faster
- Chip control at heavy depths of cut
- Work-hardened skin from hot rolling