CNC Milling for Alloy Steel 4140

4140 alloy steel mills cleanly in the annealed condition with predictable chip formation. In the pre-hardened condition (28-32 HRC), it requires carbide tooling with appropriate coatings.

推奨加工パラメータ

パラメータ値
達成可能な公差±0.02 mm (±0.0008")
表面粗さRa 0.8-3.2 μm
切削速度80-150 m/min (SFM 260-500)
送り速度0.06-0.12 mm/tooth
工具推奨Carbide end mills with TiAlN coating, 4 flutes. Use insert mills for roughing large volumes.

専門家の加工ヒント

1

Machine in annealed condition when possible

2

Use positive rake angles for better chip flow

3

Flood coolant recommended for heat dissipation

4

Through-hardened material requires reduced speeds

一般的な製造部品

Toolholders

Shafts and spindles

Gear blanks

Coupling housings

Sprocket assemblies

加工の課題

  • Higher hardness requires slower speeds
  • Chip control important in deep pockets
  • Pre-hardened condition accelerates tool wear

加工を始める準備はできましたか?

図面またはCADファイルをアップロードして、お見積もりをご依頼ください。

無料見積もりを取得