CNC Milling for Aluminum 6061-T6

Aluminum 6061 is one of the most popular materials for CNC milling due to its excellent machinability, good strength, and cost-effectiveness. It machines cleanly with minimal tool wear and produces an excellent surface finish.

推奨加工パラメータ

パラメータ値
達成可能な公差±0.02 mm (±0.0008")
表面粗さRa 0.4-1.6 μm
切削速度200-400 m/min (SFM 650-1300)
送り速度0.05-0.15 mm/tooth
工具推奨Carbide end mills with 2-3 flutes, uncoated or ZrN coated. HSS acceptable for prototyping.

専門家の加工ヒント

1

Use high spindle speeds (8,000-15,000 RPM) for optimal chip formation

2

Climb milling preferred for better surface finish

3

Use 3-flute end mills for efficient chip evacuation

4

Coolant recommended but not always required

5

Can achieve mirror finishes with proper parameters

一般的な製造部品

Housings and enclosures

Brackets and mounting plates

Heat sinks

Structural frames

Jigs and fixtures

加工の課題

  • Built-up edge at low speeds
  • Material may gall on tool at insufficient chip load

加工を始める準備はできましたか?

図面またはCADファイルをアップロードして、お見積もりをご依頼ください。

無料見積もりを取得