4.5-Axis CNC Machining for Copper C110 (ETP Copper)
4.5-axis machining of copper is used for complex waveguide cavities, RF components, and electrode manufacturing where the compound geometries cannot be achieved with 3-axis work.
推奨加工パラメータ
| パラメータ | 値 |
|---|---|
| 達成可能な公差 | ±0.02 mm |
| 表面粗さ | Ra 0.4-1.6 μm |
| 切削速度 | 100-300 m/min |
| 送り速度 | 0.05-0.15 mm/tooth |
| 工具推奨 | PCD ball nose end mills. Sharp uncoated carbide. Polished flute tools to reduce adhesion. |
専門家の加工ヒント
1
Manage long chips carefully with through-spindle air
2
Program consistent engagement to avoid chip nesting
3
PCD tooling for best surface quality
4
Consider EDM for very complex cavity shapes
一般的な製造部品
Waveguide cavities
RF resonators
Complex electrode shapes
Particle accelerator components
加工の課題
- Chip management in enclosed 4.5-axis work envelope
- Material softness causes deflection
- High material cost for large billets