CNC Milling for Copper C110 (ETP Copper)

CNC milling copper is challenging due to its softness and tendency to produce long, stringy chips. Sharp tooling and appropriate chip-breaking strategies are essential for successful results.

推奨加工パラメータ

パラメータ値
達成可能な公差±0.02 mm (±0.0008")
表面粗さRa 0.4-1.6 μm
切削速度100-300 m/min (SFM 330-1000)
送り速度0.05-0.15 mm/tooth
工具推奨Carbide with sharp edges, 2-3 flutes. PCD tools for best finish. Avoid TiAlN coatings (copper affinity).

専門家の加工ヒント

1

Use very sharp tools with positive rake

2

High feed rates help with chip breaking

3

Consider chip-breaking geometry end mills

4

Avoid rubbing — maintain constant chip load

5

Use compressed air or mist coolant

一般的な製造部品

Bus bars

Heat exchanger plates

Electrode components

RF cavities

Cooling channel blocks

加工の課題

  • Long stringy chips wrap around tools
  • Material adhesion to cutting edges
  • Burr formation on exits
  • Soft material deforms easily

加工を始める準備はできましたか?

図面またはCADファイルをアップロードして、お見積もりをご依頼ください。

無料見積もりを取得