Rapid Prototyping for Titanium Grade 5 (Ti-6Al-4V)
Rapid prototyping in titanium Grade 5 is essential for aerospace and medical projects where material-specific testing cannot substitute with alternatives.
Recommended Machining Parameters
| Parameter | Value |
|---|---|
| Achievable Tolerances | ±0.02 mm (prototype standard) |
| Surface Finish | Ra 1.6-3.2 μm |
| Cutting Speed | 30-60 m/min |
| Feed Rate | 0.08-0.15 mm/tooth |
| Tooling Recommendations | Specialized titanium tooling. |
Expert Machining Tips
1
Allow 5-7 day lead time minimum
2
Expect 3-5x cost premium over aluminum
3
Design to minimize material waste (expensive stock)
4
Combine multiple parts per setup when possible
Common Parts Made
Medical implant prototypes
Aerospace test articles
Motorsport validation parts
Machining Challenges
- Very expensive material and machining
- Long lead times
- Specialized tooling needed