CNC Turning for PEEK (Polyether Ether Ketone)
Turning PEEK requires managing heat to prevent changes in crystallinity and dimensional instability. Sharp tooling and appropriate speeds produce excellent results.
Recommended Machining Parameters
| Parameter | Value |
|---|---|
| Achievable Tolerances | ±0.02 mm (±0.001") |
| Surface Finish | Ra 0.8-3.2 μm |
| Cutting Speed | 150-300 m/min |
| Feed Rate | 0.05-0.15 mm/rev |
| Tooling Recommendations | Sharp uncoated carbide or PCD. Positive rake angle. Polished insert face to reduce friction. |
Expert Machining Tips
1
Use compressed air cooling — avoid oil contamination
2
Sharp positive inserts essential
3
Light finishing cuts for best tolerance
4
Support long parts to prevent deflection
Common Parts Made
Bearing sleeves
Seal rings
Surgical instrument handles
Electrical insulator bushings
Valve seats
Machining Challenges
- High material cost — minimize scrap
- Thermal expansion during machining
- Difficult to hold concentricity on long parts