CNC Milling for Delrin (POM / Acetal)
Delrin is one of the best plastics for CNC milling, producing clean chips and excellent surface finishes. Its high stiffness allows tight tolerances to be held reliably.
建議加工參數
| 參數 | 數值 |
|---|---|
| 可達公差 | ±0.02 mm (±0.001") |
| 表面光潔度 | Ra 0.4-1.6 μm |
| 切削速度 | 150-400 m/min (SFM 500-1300) |
| 進給速率 | 0.08-0.20 mm/tooth |
| 刀具建議 | Sharp uncoated carbide, 2 flutes with high helix for chip evacuation. O-flute end mills for fine finish. |
專家加工技巧
1
High speeds and feeds for clean chip formation
2
Use sharp tools to prevent melting
3
Air cooling is usually sufficient
4
Avoid heavy depths of cut on thin walls
5
Allow material to stabilize at room temp before final cuts
常見加工零件
Gears and sprockets
Bearing bushings
Conveyor guides
Pump impellers
Precision spacers
加工挑戰
- Chips can melt and re-weld if speed too high
- Material expands with temperature
- Cannot be painted or glued easily