Rapid Prototyping for PEEK (Polyether Ether Ketone)
PEEK rapid prototyping provides production-representative parts for aerospace, medical, and semiconductor validation. The high material cost makes design optimization critical before cutting.
推奨加工パラメータ
| パラメータ | 値 |
|---|---|
| 達成可能な公差 | ±0.05 mm (prototype standard) |
| 表面粗さ | Ra 1.6-3.2 μm |
| 切削速度 | 100-250 m/min |
| 送り速度 | 0.05-0.15 mm/tooth |
| 工具推奨 | Sharp uncoated carbide. |
専門家の加工ヒント
1
Optimize design to minimize material waste
2
Consider cheaper plastics for initial form/fit checks
3
Stock availability may add lead time
4
Air cooling only to maintain material properties
一般的な製造部品
Aerospace bearing prototypes
Medical device housings
Semiconductor fixtures
加工の課題
- Very expensive stock — $100+/kg
- Limited stock sizes may require special order
- Material properties change with machining temperature