CNC Milling for Titanium Grade 5 (Ti-6Al-4V)
Milling Ti-6Al-4V is one of the most challenging CNC operations due to titanium's low thermal conductivity, high strength, and chemical reactivity with cutting tools. Specialized techniques are essential.
推奨加工パラメータ
| パラメータ | 値 |
|---|---|
| 達成可能な公差 | ±0.02 mm (±0.0008") |
| 表面粗さ | Ra 0.8-3.2 μm |
| 切削速度 | 30-60 m/min (SFM 100-200) |
| 送り速度 | 0.08-0.15 mm/tooth |
| 工具推奨 | Carbide with AlTiN or TiB2 coating. 4-5 flute variable helix. Consider ceramic end mills for roughing. |
専門家の加工ヒント
1
Use very low cutting speeds to manage heat
2
High feed per tooth to maintain chip thickness
3
High-pressure through-spindle coolant is mandatory
4
Climb milling only — conventional milling causes severe rubbing
5
Use trochoidal milling for slots and pockets
一般的な製造部品
Turbine blade blanks
Aerospace structural fittings
Medical implant components
Compressor housings
Motorsport brackets
加工の課題
- Rapid tool wear from chemical affinity
- Heat concentrates at cutting edge
- Titanium catches fire if chips ignite
- Requires rigid machine and fixturing