Surface Finishing for PEEK (Polyether Ether Ketone)
PEEK surface finishing is limited compared to metals. The primary options are as-machined (most common), polished, and bead blasted. Coatings are rarely applied.
Parametres d'usinage recommandes
| Parametre | Valeur |
|---|---|
| Tolerances realisables | ±0.02 mm (finished) |
| Etat de surface | Ra 0.4-3.2 μm |
| Vitesse de coupe | N/A |
| Vitesse d'avance | N/A |
| Outillage recommande | N/A — post-machining polishing/blasting |
Conseils d'usinage expert
1
As-machined is the standard finish
2
Polish for reduced friction in bearing applications
3
Bead blast for uniform matte appearance
4
No plating or anodizing possible
Pieces couramment fabriquees
Polished bearing surfaces
Bead-blasted housings
As-machined structural parts
Defis d'usinage
- Limited finishing options
- Difficult to bond or coat
- Color limited to natural (beige/brown)