Surface Finishing for PEEK (Polyether Ether Ketone)
PEEK surface finishing is limited compared to metals. The primary options are as-machined (most common), polished, and bead blasted. Coatings are rarely applied.
권장 가공 매개변수
| 매개변수 | 값 |
|---|---|
| 달성 가능 공차 | ±0.02 mm (finished) |
| 표면 조도 | Ra 0.4-3.2 μm |
| 절삭 속도 | N/A |
| 이송 속도 | N/A |
| 공구 추천 | N/A — post-machining polishing/blasting |
전문가 가공 팁
1
As-machined is the standard finish
2
Polish for reduced friction in bearing applications
3
Bead blast for uniform matte appearance
4
No plating or anodizing possible
일반 가공 부품
Polished bearing surfaces
Bead-blasted housings
As-machined structural parts
가공 과제
- Limited finishing options
- Difficult to bond or coat
- Color limited to natural (beige/brown)