CNC Milling for Delrin (POM / Acetal)

Delrin is one of the best plastics for CNC milling, producing clean chips and excellent surface finishes. Its high stiffness allows tight tolerances to be held reliably.

권장 가공 매개변수

매개변수값
달성 가능 공차±0.02 mm (±0.001")
표면 조도Ra 0.4-1.6 μm
절삭 속도150-400 m/min (SFM 500-1300)
이송 속도0.08-0.20 mm/tooth
공구 추천Sharp uncoated carbide, 2 flutes with high helix for chip evacuation. O-flute end mills for fine finish.

전문가 가공 팁

1

High speeds and feeds for clean chip formation

2

Use sharp tools to prevent melting

3

Air cooling is usually sufficient

4

Avoid heavy depths of cut on thin walls

5

Allow material to stabilize at room temp before final cuts

일반 가공 부품

Gears and sprockets

Bearing bushings

Conveyor guides

Pump impellers

Precision spacers

가공 과제

  • Chips can melt and re-weld if speed too high
  • Material expands with temperature
  • Cannot be painted or glued easily

가공을 시작할 준비가 되셨나요?

도면 또는 CAD 파일을 업로드하고 견적을 받아보세요.

무료 견적 받기