CNC Milling for Delrin (POM / Acetal)
Delrin is one of the best plastics for CNC milling, producing clean chips and excellent surface finishes. Its high stiffness allows tight tolerances to be held reliably.
Parametros de mecanizado recomendados
| Parametro | Valor |
|---|---|
| Tolerancias alcanzables | ±0.02 mm (±0.001") |
| Acabado superficial | Ra 0.4-1.6 μm |
| Velocidad de corte | 150-400 m/min (SFM 500-1300) |
| Velocidad de avance | 0.08-0.20 mm/tooth |
| Herramientas recomendadas | Sharp uncoated carbide, 2 flutes with high helix for chip evacuation. O-flute end mills for fine finish. |
Consejos de mecanizado experto
1
High speeds and feeds for clean chip formation
2
Use sharp tools to prevent melting
3
Air cooling is usually sufficient
4
Avoid heavy depths of cut on thin walls
5
Allow material to stabilize at room temp before final cuts
Piezas comunes fabricadas
Gears and sprockets
Bearing bushings
Conveyor guides
Pump impellers
Precision spacers
Desafios de mecanizado
- Chips can melt and re-weld if speed too high
- Material expands with temperature
- Cannot be painted or glued easily
Otros materiales para CNC Milling
Otros procesos para Delrin (POM / Acetal)
Listo para comenzar el mecanizado?
Suba su plano o archivo CAD y reciba una cotización.
Solicitar presupuesto gratuito