CNC Milling for Aluminum 6061-T6
Aluminum 6061 is one of the most popular materials for CNC milling due to its excellent machinability, good strength, and cost-effectiveness. It machines cleanly with minimal tool wear and produces an excellent surface finish.
Parametros de mecanizado recomendados
| Parametro | Valor |
|---|---|
| Tolerancias alcanzables | ±0.02 mm (±0.0008") |
| Acabado superficial | Ra 0.4-1.6 μm |
| Velocidad de corte | 200-400 m/min (SFM 650-1300) |
| Velocidad de avance | 0.05-0.15 mm/tooth |
| Herramientas recomendadas | Carbide end mills with 2-3 flutes, uncoated or ZrN coated. HSS acceptable for prototyping. |
Consejos de mecanizado experto
1
Use high spindle speeds (8,000-15,000 RPM) for optimal chip formation
2
Climb milling preferred for better surface finish
3
Use 3-flute end mills for efficient chip evacuation
4
Coolant recommended but not always required
5
Can achieve mirror finishes with proper parameters
Piezas comunes fabricadas
Housings and enclosures
Brackets and mounting plates
Heat sinks
Structural frames
Jigs and fixtures
Desafios de mecanizado
- Built-up edge at low speeds
- Material may gall on tool at insufficient chip load
Otros materiales para CNC Milling
Otros procesos para Aluminum 6061-T6
Listo para comenzar el mecanizado?
Suba su plano o archivo CAD y reciba una cotización.
Solicitar presupuesto gratuito