Tool Steel D2 vs A2: Which Die Steel for Your Application?
D2 provides maximum wear resistance for cutting and blanking operations. A2 offers better toughness and dimensional stability with minimal distortion during air hardening, ideal for precision tooling.
並列特性比較
| 特性 | Tool Steel D2 | Tool Steel A2 |
|---|---|---|
| 抗拉強度 | 862 MPa (125 ksi) | 896 MPa (130 ksi) |
| 屈服強度 | 690 MPa (100 ksi) | 724 MPa (105 ksi) |
| 硬度 | 58-62 HRC | 57-62 HRC |
| 密度 | 7.70 g/cm³ | 7.86 g/cm³ |
| 可加工性評級 | 27/100 | 40/100 |
| 熱傳導率 | 20.0 W/m·K | 24.0 W/m·K |
| 熔點 | 1,421 °C | 1,420 °C |
| 公差 | ±0.02 mm | ±0.02 mm |
主要差異
| 特性 | Tool Steel D2 | Tool Steel A2 | 優勝 |
|---|---|---|---|
| Wear Resistance | Excellent | Good | Tool |
| Toughness | Low | Good | Tool |
| Dimensional Stability | Good | Excellent (air harden) | Tool |
| Hardness | 58-62 HRC | 57-62 HRC | 平手 |
| Machinability | 27/100 | 40/100 | Tool |
| Chromium Content | 12% (semi-stainless) | 5% | Tool |
您應該選擇哪種材料?
選擇 Tool Steel D2 當:
- Blanking and stamping dies
- Long-run cutting tools
- Parts requiring maximum wear life
- Slitters and forming rolls
- Gauges and wear surfaces
選擇 Tool Steel A2 當:
- Precision tooling with tight tolerances
- Punches requiring toughness
- Trimming dies
- Plastic mold components
- Parts needing minimal heat-treat distortion