PTFE (Teflon) vs PEEK: High-Performance Plastics Comparison
PTFE offers the lowest friction and broadest chemical resistance of any plastic, ideal for seals and chemical environments. PEEK provides far superior mechanical strength and dimensional precision for structural applications.
並列特性比較
| 特性 | PTFE (Teflon) | PEEK (Polyether Ether Ketone) |
|---|---|---|
| 抗拉強度 | 27 MPa (3.9 ksi) | 100 MPa (14.5 ksi) |
| 屈服強度 | 12 MPa (1.7 ksi) | 91 MPa (13.2 ksi) |
| 硬度 | Shore D55 | Rockwell M99 |
| 密度 | 2.15 g/cm³ | 1.31 g/cm³ |
| 可加工性評級 | 65/100 | 60/100 |
| 熱傳導率 | 0.25 W/m·K | 0.25 W/m·K |
| 熔點 | 327 °C | 343 °C |
| 公差 | ±0.05 mm | ±0.02 mm |
主要差異
| 特性 | PTFE (Teflon) | PEEK (Polyether Ether Ketone) | 優勝 |
|---|---|---|---|
| Friction Coefficient | 0.04 (lowest) | 0.35 | PTFE |
| Tensile Strength | 27 MPa | 100 MPa | PEEK |
| Chemical Resistance | Universal | Excellent | PTFE |
| Dimensional Stability | Poor (creeps) | Good | PEEK |
| Temperature Range | -200 to 260°C | -60 to 260°C | PTFE |
| Cost | ~$20/kg | ~$100+/kg | PTFE |
您應該選擇哪種材料?
選擇 PTFE (Teflon) 當:
- Seals and gaskets in chemical environments
- Ultra-low friction bearings
- Electrical insulation at high temps
- Chemical tank linings
- Non-stick surfaces
選擇 PEEK (Polyether Ether Ketone) 當:
- Structural and load-bearing parts
- Parts requiring tight tolerances
- High-strength aerospace components
- Medical implants
- Semiconductor wafer handling