Brass vs Copper for CNC Machining: Properties and Applications
Brass C360 is dramatically easier to machine (100 vs 20 rating) and is the clear choice for complex turned parts. Copper is the choice when maximum electrical/thermal conductivity is the primary requirement.
並列特性比較
| 特性 | Brass C360 (Free-Cutting Brass) | Copper C110 (ETP Copper) |
|---|---|---|
| 抗拉強度 | 385 MPa (56 ksi) | 220 MPa (32 ksi) |
| 屈服強度 | 310 MPa (45 ksi) | 69 MPa (10 ksi) |
| 硬度 | 78 HRB | 45 HRF |
| 密度 | 8.49 g/cm³ | 8.94 g/cm³ |
| 可加工性評級 | 100/100 | 20/100 |
| 熱傳導率 | 115 W/m·K | 388 W/m·K |
| 熔點 | 885–900 °C | 1,083 °C |
| 公差 | ±0.02 mm | ±0.02 mm |
主要差異
| 特性 | Brass C360 (Free-Cutting Brass) | Copper C110 (ETP Copper) | 優勝 |
|---|---|---|---|
| Machinability | 100/100 | 20/100 | Brass |
| Electrical Conductivity | 26% IACS | 101% IACS | Copper |
| Thermal Conductivity | 115 W/m·K | 388 W/m·K | Copper |
| Tensile Strength | 385 MPa | 220 MPa | Brass |
| Surface Finish Quality | Excellent | Good (gummy) | Brass |
| Cost | ~$3/lb | ~$5/lb | Brass |
您應該選擇哪種材料?
選擇 Brass C360 (Free-Cutting Brass) 當:
- High-volume screw machine parts
- Complex geometries requiring good machinability
- Fittings, connectors, and valve bodies
- Decorative hardware
- Parts with tight tolerances
選擇 Copper C110 (ETP Copper) 當:
- Maximum electrical conductivity needed
- Heat sinks and thermal management
- Bus bars and grounding components
- RF shielding applications
- Waveguides and electron tubes