PTFE (Teflon) vs PEEK: High-Performance Plastics Comparison
PTFE offers the lowest friction and broadest chemical resistance of any plastic, ideal for seals and chemical environments. PEEK provides far superior mechanical strength and dimensional precision for structural applications.
특성 비교
| 특성 | PTFE (Teflon) | PEEK (Polyether Ether Ketone) |
|---|---|---|
| 인장강도 | 27 MPa (3.9 ksi) | 100 MPa (14.5 ksi) |
| 항복강도 | 12 MPa (1.7 ksi) | 91 MPa (13.2 ksi) |
| 경도 | Shore D55 | Rockwell M99 |
| 밀도 | 2.15 g/cm³ | 1.31 g/cm³ |
| 절삭성 등급 | 65/100 | 60/100 |
| 열전도율 | 0.25 W/m·K | 0.25 W/m·K |
| 용융점 | 327 °C | 343 °C |
| 공차 | ±0.05 mm | ±0.02 mm |
주요 차이점
| 특성 | PTFE (Teflon) | PEEK (Polyether Ether Ketone) | 우수 |
|---|---|---|---|
| Friction Coefficient | 0.04 (lowest) | 0.35 | PTFE |
| Tensile Strength | 27 MPa | 100 MPa | PEEK |
| Chemical Resistance | Universal | Excellent | PTFE |
| Dimensional Stability | Poor (creeps) | Good | PEEK |
| Temperature Range | -200 to 260°C | -60 to 260°C | PTFE |
| Cost | ~$20/kg | ~$100+/kg | PTFE |
어떤 소재를 선택해야 할까요?
선택 PTFE (Teflon) 할 때:
- Seals and gaskets in chemical environments
- Ultra-low friction bearings
- Electrical insulation at high temps
- Chemical tank linings
- Non-stick surfaces
선택 PEEK (Polyether Ether Ketone) 할 때:
- Structural and load-bearing parts
- Parts requiring tight tolerances
- High-strength aerospace components
- Medical implants
- Semiconductor wafer handling