Surface Finishing for PEEK (Polyether Ether Ketone)
PEEK surface finishing is limited compared to metals. The primary options are as-machined (most common), polished, and bead blasted. Coatings are rarely applied.
推奨加工パラメータ
| パラメータ | 値 |
|---|---|
| 達成可能な公差 | ±0.02 mm (finished) |
| 表面粗さ | Ra 0.4-3.2 μm |
| 切削速度 | N/A |
| 送り速度 | N/A |
| 工具推奨 | N/A — post-machining polishing/blasting |
専門家の加工ヒント
1
As-machined is the standard finish
2
Polish for reduced friction in bearing applications
3
Bead blast for uniform matte appearance
4
No plating or anodizing possible
一般的な製造部品
Polished bearing surfaces
Bead-blasted housings
As-machined structural parts
加工の課題
- Limited finishing options
- Difficult to bond or coat
- Color limited to natural (beige/brown)