Tool Steel D2 vs A2: Which Die Steel for Your Application?
D2 provides maximum wear resistance for cutting and blanking operations. A2 offers better toughness and dimensional stability with minimal distortion during air hardening, ideal for precision tooling.
特性の並列比較
| 特性 | Tool Steel D2 | Tool Steel A2 |
|---|---|---|
| 引張強度 | 862 MPa (125 ksi) | 896 MPa (130 ksi) |
| 降伏強度 | 690 MPa (100 ksi) | 724 MPa (105 ksi) |
| 硬度 | 58-62 HRC | 57-62 HRC |
| 密度 | 7.70 g/cm³ | 7.86 g/cm³ |
| 被削性評価 | 27/100 | 40/100 |
| 熱伝導率 | 20.0 W/m·K | 24.0 W/m·K |
| 融点 | 1,421 °C | 1,420 °C |
| 公差 | ±0.02 mm | ±0.02 mm |
主な違い
| 特性 | Tool Steel D2 | Tool Steel A2 | 優位 |
|---|---|---|---|
| Wear Resistance | Excellent | Good | Tool |
| Toughness | Low | Good | Tool |
| Dimensional Stability | Good | Excellent (air harden) | Tool |
| Hardness | 58-62 HRC | 57-62 HRC | 同等 |
| Machinability | 27/100 | 40/100 | Tool |
| Chromium Content | 12% (semi-stainless) | 5% | Tool |
どちらの素材を選ぶべきですか?
選択 Tool Steel D2 の場合:
- Blanking and stamping dies
- Long-run cutting tools
- Parts requiring maximum wear life
- Slitters and forming rolls
- Gauges and wear surfaces
選択 Tool Steel A2 の場合:
- Precision tooling with tight tolerances
- Punches requiring toughness
- Trimming dies
- Plastic mold components
- Parts needing minimal heat-treat distortion