PTFE (Teflon) vs PEEK: High-Performance Plastics Comparison

PTFE offers the lowest friction and broadest chemical resistance of any plastic, ideal for seals and chemical environments. PEEK provides far superior mechanical strength and dimensional precision for structural applications.

特性の並列比較

特性PTFE (Teflon)PEEK (Polyether Ether Ketone)
引張強度27 MPa (3.9 ksi)100 MPa (14.5 ksi)
降伏強度12 MPa (1.7 ksi)91 MPa (13.2 ksi)
硬度Shore D55Rockwell M99
密度2.15 g/cm³1.31 g/cm³
被削性評価65/10060/100
熱伝導率0.25 W/m·K0.25 W/m·K
融点327 °C343 °C
公差±0.05 mm±0.02 mm

主な違い

特性PTFE (Teflon)PEEK (Polyether Ether Ketone)優位
Friction Coefficient0.04 (lowest)0.35PTFE
Tensile Strength27 MPa100 MPaPEEK
Chemical ResistanceUniversalExcellentPTFE
Dimensional StabilityPoor (creeps)GoodPEEK
Temperature Range-200 to 260°C-60 to 260°CPTFE
Cost~$20/kg~$100+/kgPTFE

どちらの素材を選ぶべきですか?

選択 PTFE (Teflon) の場合:

  • Seals and gaskets in chemical environments
  • Ultra-low friction bearings
  • Electrical insulation at high temps
  • Chemical tank linings
  • Non-stick surfaces
詳細を見る PTFE (Teflon)→

選択 PEEK (Polyether Ether Ketone) の場合:

  • Structural and load-bearing parts
  • Parts requiring tight tolerances
  • High-strength aerospace components
  • Medical implants
  • Semiconductor wafer handling
詳細を見る PEEK (Polyether Ether Ketone)→

どの素材を選べばよいかわかりませんか?

当社のエンジニアがお客様の用途に最適な素材を推奨します。無料相談のためにデザインをアップロードしてください。

無料見積もりを取得