Brass vs Copper for CNC Machining: Properties and Applications

Brass C360 is dramatically easier to machine (100 vs 20 rating) and is the clear choice for complex turned parts. Copper is the choice when maximum electrical/thermal conductivity is the primary requirement.

特性の並列比較

特性Brass C360 (Free-Cutting Brass)Copper C110 (ETP Copper)
引張強度385 MPa (56 ksi)220 MPa (32 ksi)
降伏強度310 MPa (45 ksi)69 MPa (10 ksi)
硬度78 HRB45 HRF
密度8.49 g/cm³8.94 g/cm³
被削性評価100/10020/100
熱伝導率115 W/m·K388 W/m·K
融点885–900 °C1,083 °C
公差±0.02 mm±0.02 mm

主な違い

特性Brass C360 (Free-Cutting Brass)Copper C110 (ETP Copper)優位
Machinability100/10020/100Brass
Electrical Conductivity26% IACS101% IACSCopper
Thermal Conductivity115 W/m·K388 W/m·KCopper
Tensile Strength385 MPa220 MPaBrass
Surface Finish QualityExcellentGood (gummy)Brass
Cost~$3/lb~$5/lbBrass

どちらの素材を選ぶべきですか?

選択 Brass C360 (Free-Cutting Brass) の場合:

  • High-volume screw machine parts
  • Complex geometries requiring good machinability
  • Fittings, connectors, and valve bodies
  • Decorative hardware
  • Parts with tight tolerances
詳細を見る Brass C360 (Free-Cutting Brass)→

選択 Copper C110 (ETP Copper) の場合:

  • Maximum electrical conductivity needed
  • Heat sinks and thermal management
  • Bus bars and grounding components
  • RF shielding applications
  • Waveguides and electron tubes
詳細を見る Copper C110 (ETP Copper)→

どの素材を選べばよいかわかりませんか?

当社のエンジニアがお客様の用途に最適な素材を推奨します。無料相談のためにデザインをアップロードしてください。

無料見積もりを取得