PTFE (Teflon) vs PEEK: High-Performance Plastics Comparison
PTFE offers the lowest friction and broadest chemical resistance of any plastic, ideal for seals and chemical environments. PEEK provides far superior mechanical strength and dimensional precision for structural applications.
Comparaison des proprietes
| Propriete | PTFE (Teflon) | PEEK (Polyether Ether Ketone) |
|---|---|---|
| Resistance a la traction | 27 MPa (3.9 ksi) | 100 MPa (14.5 ksi) |
| Limite elastique | 12 MPa (1.7 ksi) | 91 MPa (13.2 ksi) |
| Durete | Shore D55 | Rockwell M99 |
| Densite | 2.15 g/cm³ | 1.31 g/cm³ |
| Indice d'usinabilite | 65/100 | 60/100 |
| Conductivite thermique | 0.25 W/m·K | 0.25 W/m·K |
| Point de fusion | 327 °C | 343 °C |
| Tolerance | ±0.05 mm | ±0.02 mm |
Differences cles
| Propriete | PTFE (Teflon) | PEEK (Polyether Ether Ketone) | Gagnant |
|---|---|---|---|
| Friction Coefficient | 0.04 (lowest) | 0.35 | PTFE |
| Tensile Strength | 27 MPa | 100 MPa | PEEK |
| Chemical Resistance | Universal | Excellent | PTFE |
| Dimensional Stability | Poor (creeps) | Good | PEEK |
| Temperature Range | -200 to 260°C | -60 to 260°C | PTFE |
| Cost | ~$20/kg | ~$100+/kg | PTFE |
Quel materiau choisir ?
Choisissez PTFE (Teflon) quand:
- Seals and gaskets in chemical environments
- Ultra-low friction bearings
- Electrical insulation at high temps
- Chemical tank linings
- Non-stick surfaces
Choisissez PEEK (Polyether Ether Ketone) quand:
- Structural and load-bearing parts
- Parts requiring tight tolerances
- High-strength aerospace components
- Medical implants
- Semiconductor wafer handling
Pas sur du materiau a choisir ?
Nos ingenieurs peuvent recommander le meilleur materiau pour votre application. Telechargez votre conception pour une consultation gratuite.
Devis gratuit