Brass vs Copper for CNC Machining: Properties and Applications
Brass C360 is dramatically easier to machine (100 vs 20 rating) and is the clear choice for complex turned parts. Copper is the choice when maximum electrical/thermal conductivity is the primary requirement.
Comparaison des proprietes
| Propriete | Brass C360 (Free-Cutting Brass) | Copper C110 (ETP Copper) |
|---|---|---|
| Resistance a la traction | 385 MPa (56 ksi) | 220 MPa (32 ksi) |
| Limite elastique | 310 MPa (45 ksi) | 69 MPa (10 ksi) |
| Durete | 78 HRB | 45 HRF |
| Densite | 8.49 g/cm³ | 8.94 g/cm³ |
| Indice d'usinabilite | 100/100 | 20/100 |
| Conductivite thermique | 115 W/m·K | 388 W/m·K |
| Point de fusion | 885–900 °C | 1,083 °C |
| Tolerance | ±0.02 mm | ±0.02 mm |
Differences cles
| Propriete | Brass C360 (Free-Cutting Brass) | Copper C110 (ETP Copper) | Gagnant |
|---|---|---|---|
| Machinability | 100/100 | 20/100 | Brass |
| Electrical Conductivity | 26% IACS | 101% IACS | Copper |
| Thermal Conductivity | 115 W/m·K | 388 W/m·K | Copper |
| Tensile Strength | 385 MPa | 220 MPa | Brass |
| Surface Finish Quality | Excellent | Good (gummy) | Brass |
| Cost | ~$3/lb | ~$5/lb | Brass |
Quel materiau choisir ?
Choisissez Brass C360 (Free-Cutting Brass) quand:
- High-volume screw machine parts
- Complex geometries requiring good machinability
- Fittings, connectors, and valve bodies
- Decorative hardware
- Parts with tight tolerances
Choisissez Copper C110 (ETP Copper) quand:
- Maximum electrical conductivity needed
- Heat sinks and thermal management
- Bus bars and grounding components
- RF shielding applications
- Waveguides and electron tubes
Pas sur du materiau a choisir ?
Nos ingenieurs peuvent recommander le meilleur materiau pour votre application. Telechargez votre conception pour une consultation gratuite.
Devis gratuit