CNC Turning for Titanium Grade 5 (Ti-6Al-4V)
Turning titanium Grade 5 requires careful parameter control due to its poor thermal conductivity, high strength, and chemical affinity with tool materials. Rigid setups and sharp tooling are mandatory.
Parametros de mecanizado recomendados
| Parametro | Valor |
|---|---|
| Tolerancias alcanzables | ±0.02 mm (±0.0008") |
| Acabado superficial | Ra 0.8-3.2 μm |
| Velocidad de corte | 40-80 m/min |
| Velocidad de avance | 0.10-0.20 mm/rev |
| Herramientas recomendadas | Uncoated carbide (S grade) or PVD coated. Sharp positive inserts. Consider PCD for finishing. |
Consejos de mecanizado experto
1
Low cutting speeds — heat has nowhere to go
2
Maintain positive chip flow at all times
3
High-pressure coolant aimed precisely at cutting zone
4
Use C-style or rhombic inserts for better heat dissipation
5
Never recut chips — they work-harden instantly
Piezas comunes fabricadas
Medical implant shafts
Aerospace fasteners
Turbine shaft sleeves
Valve stems
Racing axle components
Desafios de mecanizado
- Chemical reaction with tool coatings
- Chip can ignite if too thin
- Spring-back causes dimensional issues
- Requires specialized coolant management
Otros materiales para CNC Turning
Otros procesos para Titanium Grade 5 (Ti-6Al-4V)
Listo para comenzar el mecanizado?
Suba su plano o archivo CAD y reciba una cotización.
Solicitar presupuesto gratuito