PTFE (Teflon) vs PEEK: High-Performance Plastics Comparison
PTFE offers the lowest friction and broadest chemical resistance of any plastic, ideal for seals and chemical environments. PEEK provides far superior mechanical strength and dimensional precision for structural applications.
Comparacion de propiedades
| Propiedad | PTFE (Teflon) | PEEK (Polyether Ether Ketone) |
|---|---|---|
| Resistencia a la traccion | 27 MPa (3.9 ksi) | 100 MPa (14.5 ksi) |
| Limite elastico | 12 MPa (1.7 ksi) | 91 MPa (13.2 ksi) |
| Dureza | Shore D55 | Rockwell M99 |
| Densidad | 2.15 g/cm³ | 1.31 g/cm³ |
| Indice de maquinabilidad | 65/100 | 60/100 |
| Conductividad termica | 0.25 W/m·K | 0.25 W/m·K |
| Punto de fusion | 327 °C | 343 °C |
| Tolerancia | ±0.05 mm | ±0.02 mm |
Diferencias clave
| Propiedad | PTFE (Teflon) | PEEK (Polyether Ether Ketone) | Ganador |
|---|---|---|---|
| Friction Coefficient | 0.04 (lowest) | 0.35 | PTFE |
| Tensile Strength | 27 MPa | 100 MPa | PEEK |
| Chemical Resistance | Universal | Excellent | PTFE |
| Dimensional Stability | Poor (creeps) | Good | PEEK |
| Temperature Range | -200 to 260°C | -60 to 260°C | PTFE |
| Cost | ~$20/kg | ~$100+/kg | PTFE |
Que material deberia elegir?
Elija PTFE (Teflon) cuando:
- Seals and gaskets in chemical environments
- Ultra-low friction bearings
- Electrical insulation at high temps
- Chemical tank linings
- Non-stick surfaces
Elija PEEK (Polyether Ether Ketone) cuando:
- Structural and load-bearing parts
- Parts requiring tight tolerances
- High-strength aerospace components
- Medical implants
- Semiconductor wafer handling
No esta seguro de que material elegir?
Nuestros ingenieros pueden recomendar el mejor material para su aplicacion. Suba su diseno para una consulta gratuita.
Solicitar presupuesto gratuito