Wire EDM for Titanium Grade 5 (Ti-6Al-4V)
Wire EDM is an excellent process for titanium Grade 5, bypassing all the conventional machining challenges. It cuts titanium at the same speed regardless of its hardness and eliminates tool wear entirely.
Empfohlene Bearbeitungsparameter
| Parameter | Wert |
|---|---|
| Erreichbare Toleranzen | ±0.02 mm |
| Oberflaechenguete | Ra 0.2-0.8 μm |
| Schnittgeschwindigkeit | Moderate — similar to stainless |
| Vorschub | Auto-tuned by EDM controller |
| Werkzeugempfehlungen | Brass wire 0.20-0.25mm. Dedicated EDM settings for titanium. |
Experten-Bearbeitungstipps
1
EDM eliminates all titanium machining challenges
2
No tool wear — pure electrical erosion
3
Excellent for medical implant profiles
4
Hydrocarbon dielectric may be needed for some features
Typische Bauteile
Medical implant profiles
Aerospace complex features
Turbine blade roots
Precision aerospace fittings
Bearbeitungsherausforderungen
- Recast layer must be removed for implants
- Titanium forms tenacious oxide layer
- Slower than steel due to lower conductivity
Andere Verfahren fuer Titanium Grade 5 (Ti-6Al-4V)
Bereit zu starten?
Laden Sie Ihre Zeichnung oder CAD-Datei hoch und erhalten Sie ein Angebot.
Kostenloses Angebot