Rapid Prototyping for Copper C110 (ETP Copper)
Copper rapid prototyping is used for thermal and electrical validation where conductivity testing requires the actual production material.
Empfohlene Bearbeitungsparameter
| Parameter | Wert |
|---|---|
| Erreichbare Toleranzen | ±0.02 mm |
| Oberflaechenguete | Ra 0.8-1.6 μm |
| Schnittgeschwindigkeit | 100-300 m/min |
| Vorschub | 0.05-0.15 mm/tooth |
| Werkzeugempfehlungen | Sharp uncoated carbide or PCD. |
Experten-Bearbeitungstipps
1
Sharp tooling essential for good finish
2
Challenging to machine — allow extra lead time
3
Specify if high-purity C101 is needed vs standard C110
Typische Bauteile
Heat sink prototypes
Bus bar validation
Electrical contact prototypes
Bearbeitungsherausforderungen
- Gummy material — surface finish may need extra passes
- Tarnishes quickly — may need protective coating
Andere Materialien fuer Rapid Prototyping
Andere Verfahren fuer Copper C110 (ETP Copper)
Bereit zu starten?
Laden Sie Ihre Zeichnung oder CAD-Datei hoch und erhalten Sie ein Angebot.
Kostenloses Angebot