CNC Milling for Delrin (POM / Acetal)

Delrin is one of the best plastics for CNC milling, producing clean chips and excellent surface finishes. Its high stiffness allows tight tolerances to be held reliably.

Empfohlene Bearbeitungsparameter

ParameterWert
Erreichbare Toleranzen±0.02 mm (±0.001")
OberflaechengueteRa 0.4-1.6 μm
Schnittgeschwindigkeit150-400 m/min (SFM 500-1300)
Vorschub0.08-0.20 mm/tooth
WerkzeugempfehlungenSharp uncoated carbide, 2 flutes with high helix for chip evacuation. O-flute end mills for fine finish.

Experten-Bearbeitungstipps

1

High speeds and feeds for clean chip formation

2

Use sharp tools to prevent melting

3

Air cooling is usually sufficient

4

Avoid heavy depths of cut on thin walls

5

Allow material to stabilize at room temp before final cuts

Typische Bauteile

Gears and sprockets

Bearing bushings

Conveyor guides

Pump impellers

Precision spacers

Bearbeitungsherausforderungen

  • Chips can melt and re-weld if speed too high
  • Material expands with temperature
  • Cannot be painted or glued easily

Bereit zu starten?

Laden Sie Ihre Zeichnung oder CAD-Datei hoch und erhalten Sie ein Angebot.

Kostenloses Angebot