CNC Milling for Alloy Steel 4140

4140 alloy steel mills cleanly in the annealed condition with predictable chip formation. In the pre-hardened condition (28-32 HRC), it requires carbide tooling with appropriate coatings.

Empfohlene Bearbeitungsparameter

ParameterWert
Erreichbare Toleranzen±0.02 mm (±0.0008")
OberflaechengueteRa 0.8-3.2 μm
Schnittgeschwindigkeit80-150 m/min (SFM 260-500)
Vorschub0.06-0.12 mm/tooth
WerkzeugempfehlungenCarbide end mills with TiAlN coating, 4 flutes. Use insert mills for roughing large volumes.

Experten-Bearbeitungstipps

1

Machine in annealed condition when possible

2

Use positive rake angles for better chip flow

3

Flood coolant recommended for heat dissipation

4

Through-hardened material requires reduced speeds

Typische Bauteile

Toolholders

Shafts and spindles

Gear blanks

Coupling housings

Sprocket assemblies

Bearbeitungsherausforderungen

  • Higher hardness requires slower speeds
  • Chip control important in deep pockets
  • Pre-hardened condition accelerates tool wear

Bereit zu starten?

Laden Sie Ihre Zeichnung oder CAD-Datei hoch und erhalten Sie ein Angebot.

Kostenloses Angebot