PTFE (Teflon) vs PEEK: High-Performance Plastics Comparison
PTFE offers the lowest friction and broadest chemical resistance of any plastic, ideal for seals and chemical environments. PEEK provides far superior mechanical strength and dimensional precision for structural applications.
Eigenschaftsvergleich
| Eigenschaft | PTFE (Teflon) | PEEK (Polyether Ether Ketone) |
|---|---|---|
| Zugfestigkeit | 27 MPa (3.9 ksi) | 100 MPa (14.5 ksi) |
| Streckgrenze | 12 MPa (1.7 ksi) | 91 MPa (13.2 ksi) |
| Haerte | Shore D55 | Rockwell M99 |
| Dichte | 2.15 g/cm³ | 1.31 g/cm³ |
| Zerspanbarkeit | 65/100 | 60/100 |
| Waermeleitfaehigkeit | 0.25 W/m·K | 0.25 W/m·K |
| Schmelzpunkt | 327 °C | 343 °C |
| Toleranz | ±0.05 mm | ±0.02 mm |
Hauptunterschiede
| Eigenschaft | PTFE (Teflon) | PEEK (Polyether Ether Ketone) | Gewinner |
|---|---|---|---|
| Friction Coefficient | 0.04 (lowest) | 0.35 | PTFE |
| Tensile Strength | 27 MPa | 100 MPa | PEEK |
| Chemical Resistance | Universal | Excellent | PTFE |
| Dimensional Stability | Poor (creeps) | Good | PEEK |
| Temperature Range | -200 to 260°C | -60 to 260°C | PTFE |
| Cost | ~$20/kg | ~$100+/kg | PTFE |
Welches Material sollten Sie waehlen?
Waehlen Sie PTFE (Teflon) wenn:
- Seals and gaskets in chemical environments
- Ultra-low friction bearings
- Electrical insulation at high temps
- Chemical tank linings
- Non-stick surfaces
Waehlen Sie PEEK (Polyether Ether Ketone) wenn:
- Structural and load-bearing parts
- Parts requiring tight tolerances
- High-strength aerospace components
- Medical implants
- Semiconductor wafer handling
Unsicher welches Material?
Unsere Ingenieure empfehlen das beste Material fuer Ihre Anwendung. Laden Sie Ihr Design fuer eine kostenlose Beratung hoch.
Kostenloses Angebot