Brass vs Copper for CNC Machining: Properties and Applications

Brass C360 is dramatically easier to machine (100 vs 20 rating) and is the clear choice for complex turned parts. Copper is the choice when maximum electrical/thermal conductivity is the primary requirement.

Eigenschaftsvergleich

EigenschaftBrass C360 (Free-Cutting Brass)Copper C110 (ETP Copper)
Zugfestigkeit385 MPa (56 ksi)220 MPa (32 ksi)
Streckgrenze310 MPa (45 ksi)69 MPa (10 ksi)
Haerte78 HRB45 HRF
Dichte8.49 g/cm³8.94 g/cm³
Zerspanbarkeit100/10020/100
Waermeleitfaehigkeit115 W/m·K388 W/m·K
Schmelzpunkt885–900 °C1,083 °C
Toleranz±0.02 mm±0.02 mm

Hauptunterschiede

EigenschaftBrass C360 (Free-Cutting Brass)Copper C110 (ETP Copper)Gewinner
Machinability100/10020/100Brass
Electrical Conductivity26% IACS101% IACSCopper
Thermal Conductivity115 W/m·K388 W/m·KCopper
Tensile Strength385 MPa220 MPaBrass
Surface Finish QualityExcellentGood (gummy)Brass
Cost~$3/lb~$5/lbBrass

Welches Material sollten Sie waehlen?

Waehlen Sie Brass C360 (Free-Cutting Brass) wenn:

  • High-volume screw machine parts
  • Complex geometries requiring good machinability
  • Fittings, connectors, and valve bodies
  • Decorative hardware
  • Parts with tight tolerances
Details anzeigen Brass C360 (Free-Cutting Brass)→

Waehlen Sie Copper C110 (ETP Copper) wenn:

  • Maximum electrical conductivity needed
  • Heat sinks and thermal management
  • Bus bars and grounding components
  • RF shielding applications
  • Waveguides and electron tubes
Details anzeigen Copper C110 (ETP Copper)→

Unsicher welches Material?

Unsere Ingenieure empfehlen das beste Material fuer Ihre Anwendung. Laden Sie Ihr Design fuer eine kostenlose Beratung hoch.

Kostenloses Angebot